SNT Products
Introduction to spinning system and carbon fiber production system
Melt spinning system
Melt spinning system
(MS - 500)
This system is used to high-performance filaments after melting polymers at high temperature, fiberizing melt polymers with the melt-spinning system, and hardening the surface through rapid cooling and winding.
Extruder
- Capacity : Twin(0.5kg ~ 1.5kg /hr), Single(0.5 ~ 8.0kg/hr)
- Design Temp. : 350°C
Gear Pump AB
- Capacity : 0.6 ~ 2.4cc/rev. 40rpm
- Heater: Max 350°C
Spin Nozzle
- Nozzle hole Size : ∮0.2, ∮0.25, ∮0.3, ∮0.35, ∮0.5, ∮1.00
- Material : SUS 630 (Heat-and chemical-resistant property)
Winder
- Speed : 1,000m/min
- Winding Type : Air Shaft 3"
Melt Spinning System
We are providing melt-spinning systems for research and pilot production to manufacture textile products using melt-spinning methods, which supports single to 500 holes according to nozzle sizes.
| Item | Unit | MS5 | MS24 | MS500 |
| T-put | kg/hr | 0.5 | 4.0 | 30.0 |
| Metering Pump | ㎖/rev. | x | 0.6 | 5.0 20.0 |
| Temperature | ℃ | Max. 350 | ||
| Winding speed | m/min | Max. 1,000 | ||
| Hole Diameter | mm | ∮0.25, ∮0.3, ∮0.35 | ||
| Hole Count | mm | 1 ~ 5 | 24 | 100, 500 |
| Intended purposes | Basic research and development (R&D) | Research and development (R&D) | Research and pilot production | |
| Feeding method | Air pressure type (Air pressure) | Extrusion type (Twin-Ext') | Extrusion type (Twin-Ext') |
